Research highlight


  • >
  • >
  • Research highlight
등록일 2014-10-17 

The dilemma of graphene coating: To be or not to be hydrophobic

The hydrophobicity (or philicity) of a surface tells us how the surface interacts with water. When the surface of an object is composed of hydrophilic material (typically polar substances such as metal oxides), a water drop spreads on the surface making a small ( 150°) where the air pockets support water drops avoiding contact with the actual surface. There are certain advantages when the surface is hydrophobic; for example in a water harvesting application a hydrophobic surface lets condensed water drops roll much more easily, thus increasing the efficiency of collecting water from the air.

Graphene, a single atomic-layer sheet of carbon atoms arranged in a hexagonal lattice, has unique properties such as outstanding mechanical strength, transparency, high flexibility, conductivity, high impermeability to gas, as well as thermal and chemical stabilities. It is possible to transfer a graphene layer to a surface (usually via a wet chemical transfer technique) to form graphene-coated surfaces, which inherit the superior properties of graphene and become anti-corrosive and resistant to chemical oxidation. However, due to the atomic thickness of a graphene layer, the hydrophobicity of graphene-coated surface is not solely dictated by graphene but also affected by the underlying surface.

The contact angle of graphene is ~100° meaning just slightly hydrophobic by itself. Graphene becomes “wetting-transparent” when coated onto a hydrophilic surface and allows for interaction between the underlying surface and water through the graphene layer. However, graphene becomes “wetting-opaque” and governs the hydrophobicity of the surface when the underlying surface is more hydrophobic than graphene. This implies that a graphene-coated surface cannot be more hydrophobic than graphene. This applies to microtextured surfaces as well, since conventional graphene transfer techniques let the flat graphene layer “sit” on the surface therefore shading the surface texture beneath.

Conformal graphene coating by CVD

Researchers at KAIST, led by Professor Il-Kwon Oh in the Division of Ocean System Engineering and Graphene Research Center at the KAIST Institute, tackled this problem by developing a new graphene-coating technique. In collaboration with Professor Nikhil Koratkar, at the Rensselaer Polytechnic Institute, they found that graphene grown by thermal chemical vapor deposition (CVD) on a roughened copper surface (contact angle was ~128°) could conform perfectly to roughness features with good adhesion. In contrast to the previous results using transferred graphenes, this in-situ graphene-coating technique preserves the surface texture and therefore maintains strong water repellency (showing contact angle of ~125°), meaning that the graphene-coated surface is “wetting-transparent” even though the underlying surface is more hydrophobic than graphene. The team recently published these striking results in Advanced Materials. The paper was highlighted on the inside front cover of the coming issue on August 13.

In order to create the appropriate surface texture, the team electroplated copper oxide particles onto copper foil which resulted in a hierarchically roughened surface. Thermal annealing at 850°C reduced the copper oxide into copper and subsequent CVD, using methane as the hydrocarbon source, promoted adsorption of carbon atoms on the surface and the formation of a graphene monolayer following the surface topology.

This graphene coating method was also highly resistant to corrosion. No oxidized copper species were detected when the graphene-coated copper sample was heated to 200°C in the air for four hours, and the contact angle was maintained after dipping the sample in 0.1 M NaCl aqueous solution for five hours. “It means our graphene coating really protects the copper surface and maintains the surface topology,” said Gun-Tae Kim, a graduate student in the Division of Ocean System Engineering, who is the first author of the paper.

Promise in water harvesting

There are many places that require such coating with excellent anti-corroive and wetting-stability effects. Components in a desalination plant, such as heat exchangers and condensers, could be protected from oxidation and corrosion caused by seawater. Another application could be water harvesting via dehumidification, which the team demonstrated in the paper. 30% more water could be collected with the graphene-coated copper surface compared to a flat-copper surface without graphene coating.

“On the hydrophobic graphene-coated surface, water condenses to form drops and falls down rapidly,” said Professor Oh. Importantly, the graphene-coated surface maintains its water-harvesting capability while a non-coated copper surface will gradually lose it as surface oxidation will increase the interfacial thermal resistance and hinder heat transfer, which is critical in condensation. The research team even speculated that it may be possible to achieve superhydrophobic graphene-coated surfaces by controlling the surface roughness, which will open more applications in surface science.

This work was supported by the Ministry of Trade, Industry and Energy through the Technology Innovation Program (Graphene Materials and Components Development Program of MOTIE/KEIT 10044410) and a National Research Foundation of Korea Grant funded by the Korean Government (2012R1A2A2A01047543).

Prof. Oh, Il-Kwon                                                                                              2014 KAIST Matrix

Making Graphene Using Laser-induced Phase Separation
- KAIST researchers reveal how laser annealing technology leads to the synthesis of graphene from silicon carbide (SiC). The laser annealing technology has been adopted in mass-manufactured displays, like s...
Computer Simulations Reveal Why Graphene Nanoplatelets Are Go...
Professor Yong-Hoon Kim’s laboratory at the Graduate school of Energy, Environment, Water and Sustainability (EEWS) has revealed the electrochemical reaction mechanism of edge-selenated graphene nanoplatelets fo...
Origami of Hydrogel-laden Paper Scaffolds
A new method to bind hydrogel on paper produces implantable paper origami for tissue regeneration. The formation of organs in a living organism is triggered by an agglomeration of primitive cells that mature int...
Liquid Crystal Molecules Produce Complex Udumbara Flower Like...
"Sublimation and recondensation of liquid crystal molecules can produce complex curvatures at the nanometer scale such as an Udumbara flower-like structure." Curvatures of soft matters Curved surfaces ...
Development of 10nm-level Polymer Insulating Layers for Low-P...
Groundbreaking Polymer Insulating Layers Bring the Era of IoT Closer “Thus far, thin insulating layers for electronic devices have used inorganic materials such as oxides. However, these substances have limited ...
Ultrathin Polymer Insulator Films for Low-power Soft Electronics
Organic insulator: a key material for future soft electronics A field-effect transistor (FET) is an essential component of modern electronic devices from cell phones and computers to flat-panel displays. A FET c...
The Mystery of Luminescent Graphene Quantum Dots
Luminescence from graphene-based quantum dots Graphene is now a well-known two-dimensional material composed of a single atomic layer of carbon atoms. However many people do not know that graphene shines when th...
Stamping with Graphene
A way to transfer graphene Since Andre Geim and Konstantin Novoselov at the University of Manchester discovered how to isolate a single atomic layer of carbon atoms from graphite by using Scotch tape in 2004, th...
Sniffing VOCs with Nanomaterials
Lung cancer diagnosis in the future: sniffing one’s breath Early diagnosis is very important for the effective treatment and improvement of the survival rates of patients, which is considered especially critical...
Development of Core Technology for Graphene Quantum-dot Displays
Opening the era of paper-thin displays “Graphene quantum dots made using the graphite intercalation compound method produce high efficiency light-emitting diodes with over 1,000 cd/m2 of luminance. While the max...
Bio-Inspired Approach
Organisms: The Beginning of Future Battery Technology “The secondary-battery market is growing fast in the fields of small electronic devices, electric automobiles, and power storage. The “bio-inspired approach”...
Conformal Graphene Coating Keeps Hydrophobicity
The dilemma of graphene coating: To be or not to be hydrophobic The hydrophobicity (or philicity) of a surface tells us how the surface interacts with water. When the surface of an object is composed of hydrophi...
The Development of Graphene (a Dream Material) Transfer Techn...
Dry transfer technology for two-dimensional materials applied to various platforms "In the short term, graphene can be applied to existing devices to dramatically improve their performances. Such devices in...
Manufacturing Technology for Ultra-stretchable Materials by U...
Development of world-leading stretchable electronic materials "As the wearable computer market has become more active, it is expected that alternative technologies that increase stretchability while maintai...